« previous next »
Pages: [1]

Author Topic: After Blocking Signals Causes Cleared Signal  (Read 4755 times)

westdetroit

  • Jr. Member
  • **
  • Posts: 79
After Blocking Signals Causes Cleared Signal
« on: December 10, 2015, 02:38:11 PM »
I often use blocking a signal as a way to remind myself not to line up moves until I am ready to but after I take it down the signal "clears" providing a train a false clear and then it runs through switches causing derailments and switches out of service. I'm not sure if it's a bug or by design. The signals should remain at stop after blocking is removed. Thank you.
Logged

DPump

  • Administrator
  • Full Member
  • *****
  • Posts: 215
Re: After Blocking Signals Causes Cleared Signal
« Reply #1 on: December 11, 2015, 04:55:21 AM »
We are aware of that...
Logged

westdetroit

  • Jr. Member
  • **
  • Posts: 79
Re: After Blocking Signals Causes Cleared Signal
« Reply #2 on: December 11, 2015, 04:57:56 AM »
 8) Thank you for everything you do!  :)
Logged

DPump

  • Administrator
  • Full Member
  • *****
  • Posts: 215
Re: After Blocking Signals Causes Cleared Signal
« Reply #3 on: January 16, 2016, 10:42:19 AM »
Actually, I lied when I said I'm aware of the problem. I was thinking of something else.
Good news - it was easy to find. It is now fixed in CTC 3.21.
Logged

westdetroit

  • Jr. Member
  • **
  • Posts: 79
Re: After Blocking Signals Causes Cleared Signal
« Reply #4 on: January 16, 2016, 07:26:18 PM »
Working as intended.  ;)
Logged
Pages: [1]
« previous next »